Stainless Steels
Cencor™ Stainless (316/316L)
Precision-Finish, TGP Stainless Shaft
Cencor TGP meets or exceeds criteria for 316/316L dual certification stainless steel. It is a Chrome-Nickel-Moly austenitic stainless shaft that is suitable for high temperature service applications up to approximately 1400°F. This particular stainless steel offers a high degree of resistance to scaling, atmospheric and general corrosion than any of the SAE 300 series austenitic grades. The typical hardness is 186 BHN and the typical tensile strength is 82,000 PSI. Call or email us for a quote.
Cencor TGP is a suitable stainless steel that can be used in the food processing, petrochemical, pulp and paper, textile, marine and pharmaceutical industries.
Spacing
Features
Corrosion Resistant
Precision TGP Finish
Tight Tolerances
Scaling Resistant
Machinable
sPACING
Agency Concurrence
NACE MR0175-09
.
Typical Properties*
| Hardness | 186 BHN |
| Tensile | 82,000 PSI |
| Yield | 33,000 PSI |
| Elongation in 2″ | 35% |
| Reduction of Area | 45% |
*Based on 1/2″ test piece
.
Service Temperature
1400°F (max limit)
Available Sizes
3/16″*
1/4″
5/16″
3/8″
7/16″
1/2″
9/16″
5/8″
11/16″
3/4″
13/16″
7/8″
15/16″
1″
1-1/8″
1-3/16″
1-1/4″
1-3/8″
1-7/16″
1-1/2″
1-9/16″
1-5/8″
1-11/16″
1-3/4″
1-15/16″
1-7/8″
2″
2-1/8″
2-3/16″
2-1/4″
2-3/8″
2-7/16″
2-1/2″
2-5/8″
2-3/4″
2-15/16″
3″
3-7/16″
3-1/2″
3-15/16″
4″
4-1/2″
.
Lengths
10/13 Ft R/L and Custom Cuts
Spacing
Typical Diameter Tolerances
| Up to 1-1/2” Round | (+.000”/-.001”) |
| Over 1-1/2” to 3-1/2” Round | (+.000”/-.002”) |
| Over 3-1/2” to 4-1/2” Round | (+.000”/-.003”) |
| Up to 38MM Round | (+.000”/-.001”) |
| Over 38MM to 60MM Round | (+.000”/-.002”) |
Boxing is recommended to protect during shipment.
(equivalent to Sheffield™ Stainless)
For our bar fabrication capabilities and services, click on the button below.
