Technical Data

Mir50® Machining Guidelines

MACHINING

Use high speed tools.

Turning Single Point, and box – Speed 70/90 fpm Feed .015/.007 inch/revolution

Turning and Cut-off – Speed 70 fpm Feed .015 inch/revolution

Drilling – 1/4” Diameter Speed 50 fpm Feed .004inch/revolution 3/4” Diameter Speed 70 fpm Feed .0015 inch/revolution

Milling – Depth of Cut .050” Speed 85 fpm Feed .001/.004 inch/revolution

Tap – Speed 12/25 fpm

Note: In all cases, a certain degree of caution should be exercised when working with hardened alloys or PH stainless materials. Use equipment of sufficient capacity that is in good condition. Utilize machine operators that are properly trained and experienced in working with these materials. Appropriate safety gear should be utilized at all times.